- 1 - DP1 Module
- 1 - 3' DA Bus Cable
- 1 - Switch Cable
- 2 - Mounting Screws
The Digital Aquatics DP1 is a single pump dosing pump, that has adjustable flow from 15ml to 60ml a minute. The DP1 can be used for dosing or auto top-off.
No more having to purchase several units all tied in together when you may only need one! The DP1 operates on a master/slave basis. Purchase one master unit (a slave unit with a 6v power supply), and add as many slave units as your system requires - saving you money!
The DP1 is shipped calibrated to 30ml per minute, and is easily adjusted to suit your own aquariums demands and requirements.
Note: The first pump in the series must be powered by a 6v power supply. All others will power off of the first one, down the bus line. The DP1 also must be the last module connected in the line (it is ok to connect the SID to the last DP1 port out). Always verify the output on your system! Hose length, cable length, and power can all impact the output amount of the DP1.
Digital Aquatics DP1 Information and Quick Start Guide