- 100% natural, biological phosphate removal - no heavy metals
- Effectively reduces phosphate in freshwater and saltwater.
- Easy and convenient to use - no daily feedings or maintenance dosing.
- Helps to reduce water changes.
Phospha-Guard Bio-Cubes is the world's first solid carbohydrate based phosphate remover that naturally removes phosphate from both freshwater and seawater.
Unlike competing products that use heavy metals to remove phosphate, Phospha-Guard BioCubes uses Redfield's Ratio to remove Phosphate. Using this all natural method gives far greater performance over competing products.
Unlike pellets, Phospha-Guard Bio-Cubes is a "point-of-source" treatment which prevents system crashes occurring. The biomass created by Phospha-Guard Bio-Cubes contains no ferric oxide / hydroxide and is completely non-toxic. In fact, the biomass created by the heterotrophic bacteria is also a great source of nutrition for corals and other filter feeders such as clams.
Phospha-Guard Bio-Cubes requires virtually no maintenance and does not require an expensive fluidized media reactor to operate.
Before installing your Phospha-Guard BIO-Cubes
Phospha-Guard BIO-Cubes must be used in conjunction with Nitra-Guard BIO-Cubes Original or Nitra-Guard BIO-Cubes Titanium at a ratio of 3ml per liter of aquarium water. Before installing Phospha-Guard BIO-Cubes, allow the Nitra-Guard BIO-Cubes Original or Titanium to fully mature (approximately 12 to 14 days) and that Nitrate levels are undetectable.
Systems that have very heavy organic waste loads should be cleaned thoroughly, in particular, the gravel beds (including under the rocks) as well as the filters. DSB's can also be a source of Phosphate when overloaded with organic wastes and should be cleaned regularly. Live rock that has not been cured properly can also leach large amounts of Phosphate.
For low Phosphate levels (Below 0.75ppm) add 0.5ml per liter.
For high Phosphate levels (Above 0.75ppm) add 1ml per liter of aquarium water.
For very high Phosphate levels (Above 2ppm) it is recommended that you use Phospha-Guard GFH DARK-ICE instead.
Phospha-Guard BIO-Cubes can be added together with the Nitra-Guard Bio-Cubes Original or Titanium in the same media bag.
Phospha-Guard BIO-Cubes will mature between 12 to 14 days. Increase dosage by 0.50ml if required every 10 to 14 days.
Once desired Phosphate level has been achieved, maintain Phospha-Guard BIO-Cubes levels as required.
|Display request for quote||No|